10-1800MHz 2/4/8 Way RF wilkinson Core & Wire Power Splitter Power Divider,SMA Connect Power Divider Splitter
Product Overview
The 10MHZ-1800MHZ Core & Wire Power Divider is a universal microwave/millimeter wave component, which is a kind of device that divides one input signal energy into two outputs equal energy; It can evenly distribute one signal into two outputs. Aluminum alloy shell, It can be customized
Typical applications
The technical indexes of power distributor include frequency range, bearing power, distribution loss from main circuit to branch, insertion loss between input and output, isolation between branch ports, voltage standing wave ratio of each port, etc.
1. Frequency range: This is the working premise of various RF / microwave circuits. The design structure of power distributor is closely related to the working frequency. The working frequency of the distributor must be defined before the following design can be carried out
2. Bearing power: in the high-power distributor / synthesizer, the maximum power that the circuit element can bear is the core index, which determines what form of transmission line can be used to achieve the design task. Generally, the order of power borne by the transmission line from small to large is microstrip line, stripline, coaxial line, air stripline and air coaxial line. Which line should be selected according to the design task.
3. Distribution loss: the distribution loss from the main circuit to the branch circuit is essentially related to the power distribution ratio of the power distributor. For example, the distribution loss of two equal power dividers is 3dB and that of four equal power dividers is 6dB.
4. Insertion loss: the insertion loss between input and output is caused by the imperfect dielectric or conductor of transmission line (such as microstrip line) and considering the standing wave ratio at the input end.
5. Isolation degree: the isolation degree between branch ports is another important index of power distributor. If the input power from each branch port can only be output from the main port and should not be output from other branches, it requires sufficient isolation between branches.
6. VSWR: the smaller the VSWR of each port, the better.
Key Features
|
Feature |
Advantages |
| Ultra-wideband, 10 to 1800 | Extremely wide frequency range supports many broadband applications in a single model. |
| Low insertion loss, 4.6 dB typ. at 1.8 GHz | The combination of 16W power handling and low insertion loss makes this model a suitable candidate for distributing signals while maintaining excellent transmission of signal power. |
| High isolation, 18 dB typ. at 1 GHz | Minimizes interference between ports. |
| High power handling:
• 16W as a splitter at 25°C • 0.5W as a combiner |
The 03KPD-10^1800-2S/4S/8S is suitable for systems with a wide range of power requirements. |
| Low amplitude unbalance, 0.09 dB at 6 GHz | Produces nearly equal output signals, ideal for parallel path and multichannel systems. |
| DC Passing, 368mA | Supports applications where DC power is needed to pass through the RF line. |
Main indicators 2way
| Product Name | Power Divider |
| Frequency Range | 10～1800 MHz |
| Insertion Loss | ≤4.6dB( include theoretical loss 3dB) |
| VSWR | IN ≤2.2 : 1 OUT ≤2.2 : 1 |
| Isolation | ≥18dB |
| Amplitude Balance | ≤0.3dB |
| Impedance | 50 OHMS |
| Port Connectors | SMA-Female |
| Power Handling | CW：2 Watt |
| Operating Temperature | -35℃ ~ +65℃ |
| Storage Temperature | -40℃ ~ +80℃ |
| Relative Humidity | 0 ~ 90% |
Outline Drawing 2way
Main indicators 4way
| Product Name | Power Divider |
| Frequency Range | 10～1800 MHz |
| Insertion Loss | ≤4dB( include theoretical loss 6dB) |
| VSWR | IN ≤2.8 : 1 OUT ≤2.8 : 1 |
| Isolation | ≥18dB |
| Amplitude Balance | ≤0.4dB |
| Impedance | 50 OHMS |
| Port Connectors | SMA-Female |
| Power Handling | CW：2 Watt |
| Operating Temperature | -35℃ ~ +65℃ |
| Storage Temperature | -40℃ ~ +80℃ |
| Relative Humidity | 0 ~ 90% |
Outline Drawing 4way
Main indicators 8way
| Product Name | Power Divider |
| Frequency Range | 10～1800 MHz |
| Insertion Loss | ≤6dB( include theoretical loss 9dB) |
| VSWR | IN ≤2.8 : 1 OUT ≤2.8 : 1 |
| Isolation | ≥18dB |
| Amplitude Balance | ≤0.7dB |
| Impedance | 50 OHMS |
| Port Connectors | SMA-Female |
| Power Handling | CW：2 Watt |
| Operating Temperature | -35℃ ~ +65℃ |
| Storage Temperature | -40℃ ~ +80℃ |
| Relative Humidity | 0 ~ 90% |
Outline Drawing 8way
Packaging & Delivery
Selling Units:Single item
Single package size: 4X4X2.5 cm
Single gross weight:0.1 kg
Package Type:Export Carton Package
Lead Time：
| Quantity(Pieces) | 1 - 1 | 2 - 500 | >500 |
| Est. Time(days) | 15 | 40 | To be negotiated |
Company Profile
Sichuan Keenlion Microwave Technology Founded in 2004, Sichuan Keenlion Mircrowave techenology CO.,Ltd is the leading manufacturer of the Passive Mircrowave components in Sichuan Chengdu ,China.
We provide high-performance mirrowave components and related services for microwave applications at home and abroad. The products are cost-effective, including various power distributors, directional couplers, filters, combiners, duplexers, customized passive components, isolators and circulators. Our products are specially designed for various extreme environments and temperatures. Specifications can be formulated according to customer requirements and are applicable to all standard and popular frequency bands with various bandwidths from DC to 50GHz.
1.ROHS compliant and ISO9001:2015 ISO4001:2015 Certificate
2.Various Size & Wide Frequency
3.Advanced manufacture and surface plating
4.Specifications can be made according to the customers' requirments
5.Suitable for the indoor coverage system of cellular mobile communication
FAQ
Q:How much can your power divider frequency band do at present?
A:Our products are specially designed for various extreme environments and temperatures. Specifications can be formulated according to customer requirements and are applicable to all standard and popular frequency bands with various bandwidths from DC to 50GHz.
Q:Can the frequency band, size and appearance of your power divider be modified?
A:Yes, our company can provide customized services according to customer requirements, such as size, appearance color, coating method, etc.
