Buy High quality Diy Bandpass Filter Factory – Customized RF Cavity Filter 2400 to 2483.5MHz Band Stop Filter – Keenlion

The 04KSF-2441.75/83.5M-01S RF band stop filter is a general microwave / millimeter wave component. It is a device that allows a specific frequency band to block other frequencies at the same time. The filter can effectively filter frequencies other than the frequency point or frequency point of a specific frequency in the PSU line to obtain the PSU signal of a specific frequency or eliminate the PSU signal of a specific frequency. Filter is a kind of frequency selection device, which can make the specific frequency component in the signal pass through and greatly attenuate other frequency components. The frequency selection function of the filter can filter out interference noise or spectrum analysis. In other words, any device or system that can pass through a specific frequency component in the signal and greatly attenuate or suppress other frequency components is called a filter.

When the low-pass filter and the high pass filter are connected in parallel with each other, a band stop filter is formed. The main function of band stop filter is to eliminate the signal of specific frequency band. Band stop filters also use other names, such as band stop or notch filters. As mentioned earlier, there will be a cut-off frequency for the high pass filter and a cut-off frequency for the low-pass filter, but the band-pass and band stop filters have two cut-off frequencies.

Typical applications:

• Band stop filter is effectively used in electric guitar amplifier. Usually, the guitar will produce a buzzing sound at a frequency of 60Hz. The band stop filter used helps to reduce AC noise and amplify the signal. Not only in electric guitars, but also filters are used in acoustic applications such as basic instrument amplifiers and mandolins.

• Band stop filters are used in image and signal processing to reduce noise

• In order to reduce static electricity on radio equipment, these band stop filters are used.

• Band stop filters are used in medical applications, such as biomedical instruments, to eliminate noise.

• In DSL Internet service and noise reducer, these band stop filters are used to eliminate interference on the line.

• If there is noise in the communication, the signal will be distorted, resulting in output error. Therefore, in order to reduce this unnecessary harmonic and error, the band stop filter can be used effectively

• This filter is used in audio applications such as PA system (i.e. public address system).

• These band stop filters are used in optical communication technology for eliminating distortion. One such example is Raman spectroscopy.

Limit parameters:

Outline Drawing

Packaging & Delivery

Selling Units:Single item

Single package size: 15X5X3 cm

Single gross weight:0.06kg

Package Type:Export Carton Package

Lead Time：

Company profile:

1.Company Name:Sichuan Keenlion Microwave Technology

2. Date of establishment:Sichuan Keenlion Microwave Technology Founded in 2004.Located in Chengdu, Sichuan Province, China.

3. Product classification:We provide high-performance mirrowave components and related services for microwave applications at home and abroad. The products are cost-effective, including various power distributors, directional couplers, filters, combiners, duplexers, customized passive components, isolators and circulators. Our products are specially designed for various extreme environments and temperatures. Specifications can be formulated according to customer requirements and are applicable to all standard and popular frequency bands with various bandwidths from DC to 50GHz.

4.Product assembly process：The assembly process shall be in strict accordance with the assembly requirements to meet the requirements of light before heavy, small before large, riveting before installation, installation before welding, inner before outer, lower before upper, flat before high, and vulnerable parts before installation. The previous process shall not affect the subsequent process, and the subsequent process shall not change the installation requirements of the previous process.

5.Quality control: our company strictly controls all indicators in accordance with the indicators provided by customers. After commissioning, it is tested by professional inspectors. After all indicators are tested to be qualified, they are packaged and sent to customers.

FAQ

Q:How often are your products updated?

A:Our company has a professional design and R & D team. Based on the principle of pushing through the old and bringing forth the new and striving for development, we will constantly optimize the design, not for the best, but for the better.

 Q:How large is your company?

A:At present, the total number of people in our company is more than 50. Including machine design team, machining workshop, assembly team, commissioning team, testing team, packaging and delivery personnel, etc.