WANT A TRANSPORT?CALL US NOW
  • page_banner1

RF 2/4/8 way 500-8000MHz microstrip wilkinson power splitter/divider with SMA-Female

RF 2/4/8 way 500-8000MHz microstrip wilkinson power splitter/divider with SMA-Female

Short Description:

The Big Deal

• VSWR IN≤1.3: 1 OUT≤1.25: 1, IN : ≤1.4: 1 OUT : ≤1.3: 1,IN : ≤1.55: 1 OUT : ≤1.4: 1  across a wideband from 500 to 8000MHz

• Low RF Insertion Loss ≤1.5 dB, ≤ 2.5 dB, ≤ 4 dB and excellent return loss performance

• It can evenly distribute one signal into 2, 4, 8 way outputs,Available with SMA-Female Connectors

• Highly Recommended, Classic design, Top quality.

• Model Number: 02KPD-0.5^8G-2S/4S/8S


Product Detail

Product Tags

Technical Indicators

The technical indexes of power distributor include frequency range, bearing power, distribution loss from main circuit to branch, insertion loss between input and output, isolation between branch ports, voltage standing wave ratio of each port, etc.

1. Frequency range: This is the working premise of various RF / microwave circuits. The design structure of power distributor is closely related to the working frequency. The working frequency of the distributor must be defined before the following design can be carried out.

2. Bearing power: in the high-power distributor / synthesizer, the maximum power that the circuit element can bear is the core index, which determines what form of transmission line can be used to achieve the design task. Generally, the order of power borne by the transmission line from small to large is microstrip line, stripline, coaxial line, air stripline and air coaxial line. Which line should be selected according to the design task.

3. Distribution loss: the distribution loss from the main circuit to the branch circuit is essentially related to the power distribution ratio of the power distributor. For example, the distribution loss of two equal power dividers is 3dB and that of four equal power dividers is 6dB.

4. Insertion loss: the insertion loss between input and output is caused by the imperfect dielectric or conductor of transmission line (such as microstrip line) and considering the standing wave ratio at the input end.

5. Isolation degree: the isolation degree between branch ports is another important index of power distributor. If the input power from each branch port can only be output from the main port and should not be output from other branches, it requires sufficient isolation between branches.

6. VSWR: the smaller the VSWR of each port, the better.

Key Features

Feature

Advantages

Ultra-wideband, 0.5 to 8 GHz Extremely wide frequency range supports many broadband applications in a single model.
Low insertion loss, 0.5 dB typ. at 8 GHz The combination of 20W power handling and low insertion loss makes this model a suitable candidate for distributing signals while maintaining excellent transmission of signal power.
High isolation, 22 dB typ. at 8 GHz Minimizes interference between ports.
High power handling:
• 16W as a splitter at 25°C
• 1.5W as a combiner
The KPD-0.5^8G-2S/4S/8S is suitable for systems with a wide range of power requirements.
Low amplitude unbalance, 0.04 dB at 8 GHz Produces nearly equal output signals, ideal for parallel path and multichannel systems.
DC Passing, 630mA Supports applications where DC power is needed to pass through the RF line.

Main Indicators

Product Name 2Way Power Divider
Frequency Range 0.5-8 GHz
Insertion Loss ≤ 1.5dB(Does not include theoretical loss 3dB)
VSWR IN:≤1.4: 1@500-700MHz IN:≤1.3: 1@701-8000MHzOUT:≤1.25:1
Isolation ≥20dB
Amplitude Balance ≤±0.4 dB
Phase Balance ≤±4°
Impedance 50 OHMS
Power Handling 20 Watt
Port Connectors SMA-Female
Operating Temperature -40℃ to +80℃

Outline Drawing

35
RF 2 4 8 way 500-8000MHz microstrip wilkinson power splitterdivider with SMA-Female (6)

Main Indicators

Product Name 4Way Power Divider
Frequency Range 0.5-8GHz
Insertion Loss ≤ 2.5dB(Does not include theoretical loss 6dB)
VSWR IN:≤1.4: 1 OUT:≤1.3:1
Isolation ≥20dB
Amplitude Balance ≤±0.5 dB
Phase Balance ≤±5°
Impedance 50 OHMS
Power Handling 20 Watt
Port Connectors SMA-Female
Operating Temperature ﹣40℃ to +80℃

Outline Drawing

36
RF 2 4 8 way 500-8000MHz microstrip wilkinson power splitterdivider with SMA-Female (8)

Main Indicators

Product Name 8Way Power Divider
Frequency Range 0.5-8 GHz
Insertion Loss ≤ 4.0dB(Does not include theoretical loss 9dB)
VSWR IN:≤1.55: 1@500-700MHz
IN:≤1.45: 1@701-8000MHz
OUT:≤1.4:1
Isolation ≥18dB
Amplitude Balance ≤±0.6 dB
Phase Balance ≤±6°
Impedance 50 OHMS
Power Handling 20 Watt
Port Connectors SMA-Female
Operating Temperature -40℃ to +80℃

Outline Drawing

37
RF 2 4 8 way 500-8000MHz microstrip wilkinson power splitterdivider with SMA-Female (10)

Packaging & Delivery

Selling Units: Single item

Single package size: 15×13×2.2 cm

Single gross weight: 1.5.000 kg

Package Type: Export Carton Package

Lead Time:

Quantity(Pieces) 1 - 1 2 - 500 >500
Est. Time(days) 15 40 To be negotiated

Company Profile

Sichuan Keenlion Microwave Technology Founded in 2004, Sichuan Keenlion Mircrowave techenology CO.,Ltd is the leading manufacturer of the Passive Mircrowave components in Sichuan Chengdu ,China.

We provide high-performance mirrowave components and related services for microwave applications at home and abroad. The products are cost-effective, including various power distributors, directional couplers, filters, combiners, duplexers, customized passive components, isolators and circulators. Our products are specially designed for various extreme environments and temperatures. Specifications can be formulated according to customer requirements and are applicable to all standard and popular frequency bands with various bandwidths from DC to 50GHz.

1. ROHS compliant and ISO9001:2015  ISO4001:2015 Certificate

2. Various Size & Wide Frequency

3. Advanced manufacture and surface plating

4. Specifications can be made according to the customers' requirments

5. Suitable for the indoor coverage system of cellular mobile communication

FAQ

Q: How much can your power divider frequency band do at present?

A: Our products are specially designed for various extreme environments and temperatures. Specifications can be formulated according to customer requirements and are applicable to all standard and popular frequency bands with various bandwidths from DC to 50GHz.

Q: Can the frequency band, size and appearance of your power divider be modified?

A: Yes, our company can provide customized services according to customer requirements, such as size, appearance color, coating method, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us